vl-a10h battery

• Specifications
• Features
• Accessories

Specifications

We warrant that the sharp vl-a10h packs sold in our website are 100% brand new and free from defects in material and workmanship and with Super high capacity, Low internal resistance, Environment friendly.

• Battery Type:
• Capacity: mAh
• Battery Volt: Volt
• Weight: 0.00 g
• Warranty: 100% OEM Compatible
• Warranty: 24 Months

Features

The sharp vl-a10h is designed to replace following sharp camcorder batteries:

BT-H21	BT-H22	BT-H32	BT-H42

The vl-a10h battery is compatible with the following sharp camcorders:

VL-A10E	VL-A10H	VL-A10U	VL-A110U
VL-A40U	VL-A45U	VL-AD200U	VL-AD260U
VL-AH130U	VL-AH131	VL-AH131H	VL-AH131U
VL-AH1500	VL-AH150U	VL-AH151	VL-AH1510
VL-AH151H	VL-AH151U	VL-AH160U	VL-AH161U
VL-AH30H	VL-AH30U	VL-AH50	VL-AH500U
VL-AH50E	VL-AH50H	VL-AH50U	VL-AH60U
VL-E307	VL-E34	VL-E34H	VL-E34U
VL-E37	VL-E39	VL-E46U	VL-E47
VL-E47U	VL-E49	VL-E49U	VL-E600U
VL-E610	VL-E610H	VL-E610U	VL-E620
VL-E620U	VL-E630	VL-E630H	VL-E630U
VL-E650U	VL-E66	VL-E660	VL-E660U
VL-E665U	VL-E66U	VL-E680	VL-E680H
VL-E680U	VL-E685U	VL-E700U	VL-E720
VL-E720H	VL-E720U	VL-E750U	VL-E760
VL-E760H	VL-E760U	VL-E765U	VL-E77U
VL-E780	VL-E780H	VL-E780U	VL-E785U
VL-E96E	VL-E980E	VL-E98E	VL-H770
VL-H800U	VL-H850	VL-H850U	VL-SE10H
VL-SE10U	VL-SE20U	VL-SE50U	VL-SW50E
VL-SW50U	VL-SW980	VLE39U

Accessories

sharp vl-a10h battery Charger

Battery Tips

Take Care of you vl-a10h Camcorder Batteries

A new vl-a10h battery comes in a discharged condition and must be charged before use (refer to the devices manual for charging instructions). Upon initial use (or after a prolonged storage period) the digital camcorder battery sharp vl-a10h may require three to four charge/discharge cycles before achieving maximum capacity. New vl-a10h battery pack needs to be fully charged and discharged (cycled) a few times before it can condition to full capacity. Rechargeable batteries undergo self-discharging when left unused. Always store a camcorder battery pack in a fully charged staged for storage.When charging the digital camcorder battery for the first time the device may indicate that charging is complete after just 10 or 15 minutes. This is a normal phenomenon with rechargeable batteries. Remove the camcorder batteries from the device, reinsert it and repeat the charging procedure.

It is important to condition (fully discharge and then fully charge) the sharp vl-a10h camcorder battery every two to three weeks. Failure to do so may significantly shorten the battery's life (this does not apply to Li-Ion batteries, which do not require conditioning). To discharge, simply run the device under the battery's power until it shuts down or until you get a low battery warning. Then recharge the battery as instructed in the user's manual. If the sharp vl-a10h battery will not be in use for a month or longer, it is recommended that camcorder battery be removed from the device and stored in a cool, dry, clean place.

Popular Batteries

NB-1LH | CANON NB-1LH | NB-2LH | CANON NB-2LH | NB-2L | CANON NB-2L | NB-4L | CANON NB-4L | NP-20 | CASIO NP-20 | NP-40 | CASIO NP-40 | NP-40 | FUJIFILM NP-40 | NP-40 | OLYMPUS NP-40 | KLIC-5000 | KODAK KLIC-5000 | KLIC-5001 | KODAK KLIC-5001 | KLIC-7001 | KODAK KLIC-7001 | BP-780S | KYOCERA BP-780S | EN-EL3 | NIKON EN-EL3 | EN-EL8 | NIKON EN-EL8 | LI-10B | OLYMPUS LI-10B | NP-FC11 | SONY NP-FC11 | NP-FC10 | SONY NP-FC10 | DB-L20 | SANYO DB-L20