bp-711 battery

• Specifications
• Features
• Accessories

Specifications

We warrant that the canon bp-711 packs sold in our website are 100% brand new and free from defects in material and workmanship and with Super high capacity, Low internal resistance, Environment friendly.

• Battery Type:
• Capacity: mAh
• Battery Volt: Volt
• Weight: 0.00 g
• Warranty: 100% OEM Compatible
• Warranty: 24 Months

Features

The canon bp-711 is designed to replace following canon camcorder batteries:

BP-711	BP-714	BP-726	BP-729

The bp-711 battery is compatible with the following canon camcorders:

A-10	E-07	E-08	E-09
E-100	E-110	E-20	E-200
E-210	E-230	E-250	E-300
E-333	E-333D	E-350	E-40
E-400	E-440	E-460	E-50
E-500	E-51	E-520	E-53
E-550	E-57	E-60	E-600
E-61	E-620	E-63	E-640
E-65	E-65A	E-66	E-660
E-67	E-680	E-70	E-700
E-718	E-77	E-80	E-800
E-800Hi	E-808	E-850	E-850Hi
E-90	ES-100	ES-1000	ES-170
ES-180	ES-190	ES-200	ES-2000
ES-20V	ES-2500	ES-270	ES-280
ES-290	ES-290A	ES-300	ES-3000
ES-400V	ES-500	ES-520	ES-550
ES-600	ES-70	ES-7000	ES-750
ES-80	ES-800	ES-870	ES-90
ES-900	ES-970	ES18	ES40
EX2Hi	H-460	H-480	H-640
H-660	H-680	H-800	H-850
H-850UC-1	H520	J100	J20
L10	L1A	L2	LX-1T
LX1	LX100	UC-10	UC-15
UC-16	UC-2	UC-20	UC-2Hi
UC-30	UC-30Hi	UC-3Hi	UC-40Hi
UC-55	UC-5Hi	UC-8000	UC-L100W
UC-V1Hi	UC-X65Hi	UC15C	UC1Hi
UC1MarkII	UC25Hi	UCS-2	UCS-20
UCS-3	UCS-5	VM-E70A	VM-E77
VM-E800H

Accessories

canon bp-711 battery Charger

Battery Tips

Take Care of you bp-711 Camcorder Batteries

A new bp-711 battery comes in a discharged condition and must be charged before use (refer to the devices manual for charging instructions). Upon initial use (or after a prolonged storage period) the digital camcorder battery canon bp-711 may require three to four charge/discharge cycles before achieving maximum capacity. New bp-711 battery pack needs to be fully charged and discharged (cycled) a few times before it can condition to full capacity. Rechargeable batteries undergo self-discharging when left unused. Always store a camcorder battery pack in a fully charged staged for storage.When charging the digital camcorder battery for the first time the device may indicate that charging is complete after just 10 or 15 minutes. This is a normal phenomenon with rechargeable batteries. Remove the camcorder batteries from the device, reinsert it and repeat the charging procedure.

It is important to condition (fully discharge and then fully charge) the canon bp-711 camcorder battery every two to three weeks. Failure to do so may significantly shorten the battery's life (this does not apply to Li-Ion batteries, which do not require conditioning). To discharge, simply run the device under the battery's power until it shuts down or until you get a low battery warning. Then recharge the battery as instructed in the user's manual. If the canon bp-711 battery will not be in use for a month or longer, it is recommended that camcorder battery be removed from the device and stored in a cool, dry, clean place.

Popular Batteries

NB-1LH | CANON NB-1LH | NB-2LH | CANON NB-2LH | NB-2L | CANON NB-2L | NB-4L | CANON NB-4L | NP-20 | CASIO NP-20 | NP-40 | CASIO NP-40 | NP-40 | FUJIFILM NP-40 | NP-40 | OLYMPUS NP-40 | KLIC-5000 | KODAK KLIC-5000 | KLIC-5001 | KODAK KLIC-5001 | KLIC-7001 | KODAK KLIC-7001 | BP-780S | KYOCERA BP-780S | EN-EL3 | NIKON EN-EL3 | EN-EL8 | NIKON EN-EL8 | LI-10B | OLYMPUS LI-10B | NP-FC11 | SONY NP-FC11 | NP-FC10 | SONY NP-FC10 | DB-L20 | SANYO DB-L20